Arctic P12 Slim PWM PST 120mm Chassis Fan in Black
9.94 GBP
Consult the complete sheet with in-depth details, compare prices and identify the features of PRODUCTNAME, available at the cost of PRICE CURRENCY; it belongs to the CATEGORY NAME category; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
IDEAL FOR SMALL SPACES Unlike standard 120 mm case fans with a thickness of 25 mm, the P12 Slim PWM PST has a mounting depth of only 15 mm. This makes it the ideal choice for Small Form Factor (SFF) builds. Corresponding screws for mounting on a radiator are already included. OPTIMISED FOR HIGH STATIC PRESSURE Because the fan design of the P12 Slim PWM PST is optimised for focused airflow, it generates high static pressure. The fan enables extremely efficient cooling and good airflow— even with increased air resistance. This makes the P12 Slim PWM PST particularly well-suited for use on concealed case intakes, dust filters, radiators, and generally in small cases that have little space for free airflow due to compactly placed hardware. MAXIMUM QUIETNESS, MINIMUM VIBRATION The operating noise of the newly-developed ARCTIC motor is barely perceptible, even at the lowest speed. Thanks to its special magnetization, the motor of the P-fans generates no start-up jerks and only a fraction of the commutation vibrations of a conventional DC motor. As a result, there is far less vibration on the housing at different speeds and no need for rubber buffering or additional decoupling. IMPROVED SERVICE LIFE The new ARCTIC motor generates significantly less frictional heat than its predecessors and current competitor models. As a result, coil temperature is reduced by up to 20 degrees, quadrupling service life, while reduced frictional losses ensure more efficient operation. 300 TO 2100 RPM CONTROLLED VIA PWM PST With a wide speed range and innovative PWM Sharing Technology (PST), the P12 Slim PWM PST's fan speed can be controlled in sync with other fans. ARCTIC's PST fans come equipped with their own built-in daisy-chain solution, and, in addition to the plug-in connector, have another socket to which an additional fan or up to 4 other PST fans can be connected in series. HIGH QUALITY SLEEVE BEARING Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimized and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also reduced to a minimum. Less heat is developed, less bearing noise is generated and the life of the fan is extended significantly. 0 DB MODE - ZERO RPM The speed of the P12 Slim PWM PST can be throttled down to a standstill via PWM. This allows efficient and silent PC operation in idle while guaranteeing maximum performance on demand. VERSATILE USE The P12 Slim PWM PST allows customisable installation in the case. It can both suck in cool air as an Intake fan and push out warm air as an Exhaust fan. The fan also offers both push and pull installation options on the radiator.
EAN: 4895213703130
Shipping Costs: 3.95 GBP
Availability: in stock
Delivery Times: Next-Day delivery
Condition: new
IDEAL FOR SMALL SPACES Unlike standard 120 mm case fans with a thickness of 25 mm, the P12 Slim PWM PST has a mounting depth of only 15 mm. This makes it the ideal choice for Small Form Factor (SFF) builds. Corresponding screws for mounting on a radiator are already included. OPTIMISED FOR HIGH STATIC PRESSURE Because the fan design of the P12 Slim PWM PST is optimised for focused airflow, it generates high static pressure. The fan enables extremely efficient cooling and good airflow— even with increased air resistance. This makes the P12 Slim PWM PST particularly well-suited for use on concealed case intakes, dust filters, radiators, and generally in small cases that have little space for free airflow due to compactly placed hardware. MAXIMUM QUIETNESS, MINIMUM VIBRATION The operating noise of the newly-developed ARCTIC motor is barely perceptible, even at the lowest speed. Thanks to its special magnetization, the motor of the P-fans generates no start-up jerks and only a fraction of the commutation vibrations of a conventional DC motor. As a result, there is far less vibration on the housing at different speeds and no need for rubber buffering or additional decoupling. IMPROVED SERVICE LIFE The new ARCTIC motor generates significantly less frictional heat than its predecessors and current competitor models. As a result, coil temperature is reduced by up to 20 degrees, quadrupling service life, while reduced frictional losses ensure more efficient operation. 300 TO 2100 RPM CONTROLLED VIA PWM PST With a wide speed range and innovative PWM Sharing Technology (PST), the P12 Slim PWM PST's fan speed can be controlled in sync with other fans. ARCTIC's PST fans come equipped with their own built-in daisy-chain solution, and, in addition to the plug-in connector, have another socket to which an additional fan or up to 4 other PST fans can be connected in series. HIGH QUALITY SLEEVE BEARING Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimized and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also reduced to a minimum. Less heat is developed, less bearing noise is generated and the life of the fan is extended significantly. 0 DB MODE - ZERO RPM The speed of the P12 Slim PWM PST can be throttled down to a standstill via PWM. This allows efficient and silent PC operation in idle while guaranteeing maximum performance on demand. VERSATILE USE The P12 Slim PWM PST allows customisable installation in the case. It can both suck in cool air as an Intake fan and push out warm air as an Exhaust fan. The fan also offers both push and pull installation options on the radiator.
EAN: 4895213703130
Shipping Costs: 3.95 GBP
Availability: in stock
Delivery Times: Next-Day delivery
Condition: new
Comparison of similar products
Arctic P12 PWM PST A-RGB Semi-Passive 120mm Chassis Fan in Black
17.94 GBP
Addressable RGB for Full Colour Control The P12 PWM PST A-RGB has 12 digital A-RGB LEDs in the center fan wheel. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware. 0 dB Mode — Zero rpm The speed of the fan can be throttled down to a standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required. Maximum Smoothness, Minimum Vibration The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed. In addition, the P12 PWM PST A-RGB has rubberised contact surfaces and thus reduces audible vibrations to a minimum. Optimised for High Static Pressure The P12 PWM PST A-RGB operates with a focused airflow and high static pressure. The fan thus guarantees extremely efficient cooling, even with increased air resistance, and is, therefore, suitable for use on heat sinks, radiators, and filters. 200 to 2000 rpm Controlled via PWM PST With a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P12 PWM PST A-RGB can be controlled synchronously with all other fans. This reduces noise to a minimum while guaranteeing maximum cooling performance. High-Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. In this way, less heat develops, less bearing noise is generated and the service life of the fan is extended. Quality You Can Rely On To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how to improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality but also durability. It's a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee on the P14 PWM PST A-RGB.
Arctic P12 PWM PST CO 120mm Chassis Fan for Continuous Operation in
10.94 GBP
Optimised for Static Pressure During the development of the new P12 PWM PST CO, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 PWM PST CO is particularly suitable for use on heatsinks and radiators. 0 dB Mode — Zero rpm The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required. Strong Cooling Performance Numerous improvements, such as updated engine technology and a newly developed fan design, have noticeably increased the performance of P-fans. In internal performance tests leveled to 28 dB(A), the new P-fans left many competitors behind. More information can be found in our FAQ. More Efficient Technology The motor is powered by a PWM IC of the newest generation, which allows the new P12 PWM PST CO to run much more efficiently than its predecessors. This saves energy without compromising the performance. For Continuous Operation The premium quality of the dual ball bearing allows 24/7 continuous operation without compromising performance. Contamination and high temperatures affect this bearing much less than ordinary sleeve or ball bearings. Therefore, the dual ball bearing is the perfect choice if you want to ensure continuous operation at maximum speed. Please note that ball bearings have a physically higher bearing noise compared to conventional sleeve bearings. Maximum Quietness, minimum Vibration Even at low speeds, the operating sound of the new ARCTIC motor is barely noticeable. Due to sinus-magnetizing the new motor only creates about 5 % of the vibration from the commutation of a regular DC motor without a filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. Extended Life Span A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we give a manufacturer warranty of 6 years. 200 to 1800 rpm regulated via PWM With a wide range of regulation and the PWM Sharing Technology (PST), the P12 PWM PST CO fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed.
Arctic P12 PWM PST A-RGB 120 mm A-RGB PWM Fan with Cable Splitter in
16.94 GBP
Addressable RGB for Full Colour Control The P12 PWM PST A-RGB has 12 digital A-RGB LEDs in the center fan wheel. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware. 0 dB Mode — Zero rpm The speed of the fan can be throttled down to a standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required. Maximum Smoothness, Minimum Vibration The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed. In addition, the P12 PWM PST A-RGB has rubberised contact surfaces and thus reduces audible vibrations to a minimum. Optimised for High Static Pressure The P12 PWM PST A-RGB operates with a focused airflow and high static pressure. The fan thus guarantees extremely efficient cooling, even with increased air resistance, and is, therefore, suitable for use on heat sinks, radiators, and filters. 200 to 2000 rpm Controlled via PWM PST With a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P12 PWM PST A-RGB can be controlled synchronously with all other fans. This reduces noise to a minimum while guaranteeing maximum cooling performance. High-Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. In this way, less heat develops, less bearing noise is generated and the service life of the fan is extended. Quality You Can Rely On To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how to improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality but also durability. It's a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee on the P12 PWM PST A-RGB.
Arctic P12 PWM PST ARGB Case Fan Triple Pack - White - ACFAN00258A
33.95 GBP
The P12 PWM PST A-RGB 0dB has 12 digital A-RGB LEDs in the fan scar. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly via the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware.
Arctic P12 120mm Pressure Optimised PWM ARGB Case Fan, White - ACFAN00254A
14.95 GBP
Boost your PC's cooling prowess with Arctic's P12 120mm Pressure Optimized PWM ARGB Case Fan in sleek white. Engineered for optimal airflow dynamics, it excels in tight spaces, while its customizable ARGB lighting adds a sophisticated touch. The ultimate fusion of performance and aesthetics for your high-tech setup
Phanteks M25 Gen2 120mm Reversed Airflow DRGB PWM Triple Fan Pack - Black - PH-F120M25R_G2_DBK01_3P
25.99 GBP
Enhance your cooling setup with the Phanteks M25 Gen2 120mm Reversed Airflow DRGB PWM Triple Fan Pack. Designed for optimal airflow and silent operation, these fans deliver impressive performance with advanced PWM control. Enjoy vibrant addressable RGB lighting, ideal for any system build, ensuring efficient heat dissipation and stunning visuals.
Phanteks M25 Gen2 120mm High-Airflow DRGB PWM Triple Fan Pack in Black
29.94 GBP
The Phanteks M25 Gen2 comes packed with features previously only seen in the highest end fans. It’s Daisy-chain Unified Fan Frame easily interlocks with the next fan to link multiple fans together into one. With its blades designed specifically for high airflow performance on radiators and heat sinks, the M25 Gen2 excels where it matters. Delivering low temperatures with a clean look to elevate your system.
Phanteks M25 Gen2 120mm High-Airflow DRGB PWM Triple Fan Pack - Black - PH-F120M25_G2_DBK01_3P
25.99 GBP
Enhance cooling efficiency with Phanteks M25 Gen2 120mm High-Airflow DRGB PWM Triple Fan Pack. Featuring advanced PWM control, these fans deliver optimal airflow and pressure for superior thermal management. The elegant black design and customizable RGB lighting add a stylish touch to any setup, ensuring performance and aesthetics in one package.
Phanteks M25 Gen2 120mm High-Airflow PWM Triple Fan Pack - Black - PH-F120M25_G2_BBK01_3P
19.95 GBP
Enhance your cooling system with the Phanteks M25 Gen2 120mm High-Airflow PWM Triple Fan Pack in black. Designed for optimal airflow and noise reduction, these fans feature a speed range of 500 to 1800 RPM. With an impressive static pressure rating, they ensure efficient heat dissipation, making them perfect for gaming PCs and high-performance builds.
Phanteks D30 Reverse Airflow 120mm DRGB PWM Fan Triple Pack - Black
94.74 GBP
The Phanteks D30-120 comes equipped with integrated D-RGB lighting throughout its frame and blades on all sides. Multiple D30-120 fan frames can be linked together as one with bridge connectors and screw cover plates to reduce cables, resulting in extremely clean builds.
Arctic P12 Silent 120mm PC Case Cooling Fan - Black
9.95 GBP
This fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 Silent is particularly suitable for use on heatsinks and radiators.
Noctua NF-A12x15 PWM chromax.black.swap 120mm Chassis Fan in Black
27.94 GBP
Having received dozens of awards and recommendations from international hardware websites and magazines, the NF-A12x15 has established itself as a default choice when it comes to premium-quality slim 120mm fans. The chromax.black.swap edition combines the NF-A12x15’s signature quiet cooling performance with an attractive all-black design and a bundle of self-adhesive red, white, blue, green, yellow and black anti-vibration pads that allow the colour-customisation of the fan to match individual build colour schemes. Topped off with Noctua’s trusted premium-grade SSO2 bearing, more than 150,000 hours MTTF and 6-year manufacturer’s warranty, the NF-12x15 PWM chromax.black.swap is the perfect choice for all users who value individual, focused build aesthetics just as much as class-leading quality and performance.
Noctua NF-F12 PWM chromax.black.swap (120mm) Chassis Fan
28.94 GBP
Having received more than 100 awards and recommendations from international hardware websites and magazines, the NF-F12 is one of Noctua’s most renowned and popular 120mm fans. Its outstanding static pressure performance and the FocusedFlow™ frame make it ideal for use on heatsinks and radiators. The chromax.black.swap edition combines the NF-F12’s signature quiet cooling performance with an attractive all-black design and a bundle of swappable red, white, blue, green, yellow and black anti-vibration pads that allow the colour-customisation of the fan to match individual build colour schemes. For further customisation, a wide range of accessories such as coloured cables, additional anti-vibration pads and anti-vibration mounts are available separately. Topped off with Noctua’s trusted premium-grade SSO2 bearing, more than 150,000 hours MTTF and 6-year manufacturer’s warranty, the NF-F12 PWM chromax.black.swap is the perfect choice for all users who value individual, focused build aesthetics just as much as class-leading quality and performance.
Be Quiet! Be Quiet Pure Wings 3 PWM High Speed 120mm Chassis Fan in Black
14.94 GBP
INNOVATIVE TECHNOLOGY Closed loop motor for persistent rpm Pure Wings 3 120mm PWM high-speed features a closed loop motor. This technology is comparable with the cruise control in cars. When working against resistance, for example a fan grill or radiator, fans spin slower as a result. The closed loop motor technology constantly monitors the current fan speed and increases it to the target rpm, if necessary. As a result, Pure Wings 3 120mm PWM high-speed always operates at the desired speed, no matter the air resistance. OPTIMIZED TO THE MAX For unprecedented air pressure in its class The fan frame outlet is newly designed to minimize air leaks. This benefits especially the radiator performance of Pure Wings 3 120mm PWM high-speed. To reach even higher performance, the fan blades are optimized as well: Their angle is adjusted to achieve even more air pressure, adding up to the extraordinary performance of Pure Wings 3 120mm PWM high-speed. FOR RADIATORS AND HEATSINKS Fan blades optimized for high pressure With a remarkably high air pressure of up to 2.41mm/H2O, Pure Wings 3 120mm PWM high-speed is the best choice for water-cooled and air-cooled systems alike. The 9 airflow-optimized fan blades provide enough air pressure to make this fan work great even in demanding configurations. ICONIC DESIGN Streamlined look makes it an instant timeless classic Pure Wings 3 120mm PWM high-speed trims all the fat. Every part and single detail contribute to the functionality and uncompromising performance. This has also been considered in the design of the fan. All outlines and angles serve a purpose, making Pure Wings 3 120mm PWM high-speed a timeless classic and elegant addition to every gaming PC. RIFLE BEARING TECHNOLOGY Makes Pure Wings 3 a long-lasting companion Pure Wings 3 120mm PWM high-speed is built to last. With the proven rifle bearing technology, on average, this fan offers a lifespan of 80,000 hours.
Be Quiet! Be Quiet Pure Wings 3 PWM 120mm Chassis Fan in Black
17.94 GBP
OPTIMIZED TO THE MAX For unprecedented air pressure in its class The fan frame outlet is newly designed to minimize air leaks. This benefits especially the radiator performance of Pure Wings 3 120mm PWM. To reach even higher performance, the fan blades are optimized as well: Their angle is adjusted to achieve even more air pressure, adding up to the extraordinary performance of Pure Wings 3 120mm PWM. PERFECT CASE FAN Fan blades optimized for high airflow With optimization for maximum airflow, Pure Wings 3 120mm PWM is the right choice for any case configuration that demands high cooling performance. Its 7 airflow-optimized fan blades not only reduce noise-generating turbulences but also ensure Pure Wings 3 120mm PWM provides the performance that is needed, even in demanding configurations. ICONIC DESIGN Streamlined look makes it an instant timeless classic Pure Wings 3 120mm PWM trims all the fat. Every part and single detail contribute to the functionality and uncompromising performance. This has also been considered in the design of the fan. All outlines and angles serve a purpose, making Pure Wings 3 120mm PWM a timeless classic and elegant addition to every gaming PC. RIFLE BEARING TECHNOLOGY Makes Pure Wings 3 a long-lasting companion Pure Wings 3 120mm PWM is built to last. With the proven rifle bearing technology, on average, this fan offers a lifespan of 80,000 hours.
Arctic P14 PWM PST ARGB Case Fan Single Pack - White - ACFAN00276A
17.99 GBP
The P14 PWM PST A-RGB has 12 digital A-RGB LEDs in the center fan wheel. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly via the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware.
Corsair RS120 120mm PWM Chassis Fan in Black
13.94 GBP
Add a CORSAIR RS120 120mm PWM Fan to your cooling setup – daisy-chained 4-pin PWM connectors let you link to your other RS fans and control them all through just a single 4-pin PWM header on your motherboard. Enjoy fan speeds up to 2,100 RPM, with the static pressure to also serve as radiator fans. CORSAIR AirGuide technology with anti-vortex vanes directs airflow for concentrated, powerful cooling. Magnetic Dome bearings ensure quieter operation and increased longevity, while Zero RPM mode offers silent operation at low loads.
Noctua NF-A12x15 PWM 120mm Chassis Fan
27.94 GBP
Featuring advanced aerodynamic design measures such as Flow Acceleration Channels and Noctua’s AAO frame, the NF-A12x15 is a highly optimised, premium quality quiet fan in size 120x15mm. Its 15mm slim design makes the NF-A12x15 ideal for space-restricted applications such as low-profile CPU coolers or HTPC cases. The PWM version sports Noctua’s custom-designed NE-FD1 IC for fully automatic speed control via 4-pin fan headers and comes with a Low-Noise Adaptor to reduce the maximum speed during PWM control from 1850 to 1400rpm. Its superb running smoothness, reference-class SSO2 bearing and Noctua’s trusted premium quality make it an elite choice for the highest demands. 15mm slim design Having a thickness of only 15mm, the NF-A12x15 is much slimmer than standard 120x25mm fans. This makes it ideal for typical slim fan applications such as low-profile CPU coolers as well as for freeing up space by replacing standard 120x25mm fans on tower coolers, radiators or in PC cases. Metal-reinforced motor hub With many larger-diameter slim fan designs, the shorter axis and bearing lead to a reduced running stability and lifespan. The NF-A12x15 uses a metal-reinforced motor hub, a measure typically found in high-speed industrial fans, in order to guarantee Noctua’s signature stability and longevity. Flow Acceleration Channels The NF-A12x15 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. AAO Frame Noctua's AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua's proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan's performance/noise efficiency. Stepped Inlet Design Noctua's Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments. Inner Surface Microstructures With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency. Integrated Anti-Vibration Pads Integrated Anti-Vibration Pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks. Custom-designed PWM IC with SCD Supporting fully automatic PWM speed control, the fan uses Noctua's custom-designed NE-FD1 PWM IC that integrates Smooth Commutation Drive (SCD) technology. By providing smoother torque impulses, SCD suppresses PWM switching noises and thus...
Corsair RS120 120mm PWM Triple Pack of Chassis Fans in Black
28.94 GBP
The CORSAIR RS120 120mm PWM Fans Triple Pack gets your PC cooling setup off on the right foot with three efficient and reliable fans. Daisy-chained 4-pin PWM connectors let you link multiple fans together and control them all through just a single 4-pin PWM header on your motherboard. Enjoy fan speeds up to 2,100 RPM, with the static pressure to be great for radiator use as well. CORSAIR AirGuide technology with anti-vortex vanes directs airflow for concentrated, powerful cooling. Magnetic Dome bearings ensure quieter operation and increased longevity, while Zero RPM mode offers silent operation at low loads.
Noctua NF-A12x25 PWM 120mm Premium Chassis Fan
32.94 GBP
The NF-A12x25 is a highly optimised next-generation 120mm fan that integrates Noctua’s latest innovations in aerodynamic engineering in order to achieve an unprecedented level of quiet cooling performance. It takes state-of-the-art technologies such as the AAO (Advanced Acoustic Optimisation) frame or Flow Acceleration Channels and combines them with a record tight tip clearance of only 0.5mm, which is made possible by using the novel Sterrox® liquid-crystal polymer (LCP) compound as well as a metal-reinforced motor hub and axis for ultimate precision. Following the approach of Noctua’s A-series, the NF-A12x25 is a true all-rounder that yields superb results in all types of usage, regardless of whether it’s in low-impedance, airflow-oriented applications such as case cooling, or high-impedance, pressure-demanding scenarios such as on heatsinks and watercooling radiators. The 4-pin PWM version supports fully automatic speed control via PWM fan headers and comes with a Low-Noise Adaptor to reduce the maximum speed from 2000 to 1700rpm. Topped off with exceptional running smoothness, Noctua’s reference-class SSO2 bearing, a rich bundle of accessories and 6-year manufacturer’s warranty, the NF-A12x25 is a premium-quality product through and through. Its superior efficiency, cutting-edge construction and pioneering materials make it an elite choice for the most discerning demands.
Noctua NF-A12x25r PWM 120mm Chassis Fan
32.94 GBP
The NF-A12x25r is a round-frame version of Noctua’s award-winning flagship model 120mm NF-A12x25 fan. Its round shape makes it ideal for use on low-height dual-tower CPU coolers like the NH-D12L as well as other space-restricted applications that cannot accommodate square-frame 120mm fans. Just like the square NF-A12x25, the round NF-A12x25r uses a record-tight tip clearance of only 0.5mm, which is made possible by using the novel Sterrox® liquid-crystal polymer (LCP) compound as well as a metal-reinforced motor hub and axis for ultimate precision. Sharing the same state-of-the-art impeller design with Flow Acceleration Channels, the NF-A12x25r achieves the same class-leading quiet cooling performance as its square-frame sibling. It also supports fully automatic speed control via PWM fan headers and comes with a Low-Noise Adaptor to reduce the maximum speed from 2000 to 1700rpm. Topped off with exceptional running smoothness, Noctua’s reference-class SSO2 bearing, a rich bundle of accessories and 6-year manufacturer’s warranty, the NF-A12x25r is a premium-quality product through and through. Its superior efficiency, cutting-edge construction and pioneering materials make it an elite choice for all 120mm applications that require a round frame.
DeepCool FD12-3 IN 1 120mm PWM Triple Chassis Fan Pack in Black
31.94 GBP
NEXT WAVE OF DAISY CHAINS Outfitted with an easy-to-manage 8-pin cable that can be chained to each of the FD fans, this greatly reduces the mess of fan wires that need to be managed. SECURE CONNECTION The 8-pin connectors in the fan frames have been greatly improved to utilize a block-shaped connection rather than the straight line found with the FC series. Quick, secure, and simple. COOLING YOU CAN TRUST Equipped with a long-life hydraulic bearing. The FD12 PWM fans boast exceptional cooling specs while remaining relatively quiet. ENHANCED MATERIALS By utilizing an enhanced composite material based on PBT for the frames and polycarbonate for the fan blades, the entire fan assembly is extremely consistent and has a quieter overall sound profile. REDUCED VIBRATIONS Full-coverage rubber pads at each corner guarantee minimal fan vibration and ensure that noises resulting from uneven mounting pressure are minimized. FANS YOU CAN DEPEND ON The quality of these fans will last quite some time, but if anything arises, fear not, as all FD series fans are backed by DeepCool's limited warranty for three full years.
be quiet! Silent Wings 4 120mm PWM Chassis Fan
25.94 GBP
NO COMPROMISE SILENCE AND PERFORMANCE Equally quiet and performant operation Silent Wings 4 120mm PWM is the fan of choice for all possible operations. Be it in a case, on radiators or heat sinks – Features like the silence-optimized fan blades and the funnel shaped fan frame make Silent Wings 4 120mm PWM a fan that makes no compromises between virtually inaudible operation and high performance. OPTIMIZED FOR HIGH-END PERFORMANCE Minimum tolerances for maximum air pressure Silent Wings 4 120mm PWM makes for extraordinary air pressure and, therefore, significant increases in the system’s performance. The decreased distance between the fan blades and the frame makes it possible. By that, the Silent Wings 4 120mm PWM allows the user to run even the most demanding applications. DIFFERENT MOUNTING OPTIONS For any purpose Silent Wings 4 120mm PWM has 2 mounting options in the scope of delivery. The pre-installed anti-vibration mounting reduces noise-generating vibrations to a minimum. For radiators and heat sinks, the plastic mounting is the first choice. Both solutions have in common that they enable virtually inaudible operation at regular speed. 6-POLE FAN MOTOR The key for virtually inaudible operation when needed 6-pole fan motor with 3 phases for very low power consumption, less vibration and therefore quiet max. operation of 18.9dB(A). Equipped with this state-of-the-art technology the fan is virtually inaudible when operated in mid-speed. FLUID-DYNAMIC BEARING For a sustainable operation The advanced fluid-dynamic bearing (FDB) enables a super long fan life of up to 300,000 hours. In addition, it reduces the vibrations significantly and supports the virtually inaudible operation of Silent Wings 4 120mm PWM. ELEGANT LOOK Magnificent appearance from all angles Be it as a radiator fan or in the case: Silent Wings 4 120mm PWM always makes a good impression. The all-black design combined with the high-grade fan sticker makes the fan shine in any system. This makes Silent Wings 4 120mm PWM a high performant and an incredibly good-looking fan.
be quiet! Light Wings 120mm PWM Chassis Fan
26.94 GBP
Light Wings 120mm PWM offers impressive illumination for a vibrant unique look, strong performance and quiet operation with efficient cooling. If you are looking for a quiet case fan with an impressive look from every angle, Light Wings 120mm PWM is your fan of choice. IMPRESSIVE LIGHTING Lots of illumination possibilities Light Wings 120mm PWM offers ARGB lighting at the front and rear. The subtly lit ring at the back combined with the bright one at the front make for a magnificent appearance from every angle. 18 ARGB LEDs give you many opportunities to individualize your PC build. PERFECT CASE FAN Fan blades optimized for high airflow With optimization for maximum airflow, Light Wings 120mm PWM is the right choice for any case configuration that demands high cooling performance. Its seven airflow-optimized fan blades not only reduce noise-generating turbulences but also ensure Light Wings 120mm PWM provides the performance that is needed, even in demanding configurations. VERY QUIET OPERATION Acclaimed be quiet! low noise level A highly optimized impeller achieves the silent operation be quiet! is famous for. With a noise level of 20.6dB(A) at maximum fan speed, it proves that instead of being a replacement the lighting is an addon to very silent and powerful operation. All features combine to make Light Wings 120mm PWM the fan of choice for silent show cases and gaming systems alike. VARIABLE FAN SPEED FUNCTION Adjusts the fan speed and associated noise level Pulse Width Modulation (PWM) allows compatible 4-pin controllers, including those built into many motherboards, to intelligently vary the speed and thus the noise level of the fan. With PWM the system can ramp up the cooling when it’s needed, or operate in maximum quiet mode when it’s not.
be quiet! Silent Wings 4 Pro 120mm PWM Chassis Fan
32.94 GBP
IMPROVED ON ALL LEVELS Altered blade arrangement for new generation performance The fan blades are what makes a fan. It is for this reason that the fan blades of Silent Wings Pro 4 120mm PWM have been developed newly from scratch. The new blade arrangement enables a performance second to none for all possible operations. Be it in a case, on radiators or heat sinks. OPTIMIZED FOR HIGH-END PERFORMANCE Minimum distance for maximum air pressure Silent Wings Pro 4 120mm PWM makes for extraordinary air pressure and therefore, significantly increases the system’s performance. The decreased distance between the fan blades and the frame enables an extraordinarily high air pressure. By that, the Silent Wings Pro 4 120mm PWM allows the user to run even the most demanding applications. SPEED SWITCH 3 speed options for any possible application The speed switch makes switching between medium, high-speed and ultra-high-speed of maximum RPM levels quick and easy. The Silent Wings Pro 4 120mm PWM alters its application with a simple slide to the right. Medium-speed is suitable for any operation that requires regular cooling performance. High-speed lets the fan spin faster, providing more cooling power. Ultra-high-speed ultimately offers enough rpm to cool even the most demanding hardware in high-end PC builds. 6-POLE FAN MOTOR The key for virtually inaudible operation when needed 6-pole fan motor with 3 phases for very low power consumption, less vibration and therefore quiet max. operation of 36.9dB(A). Equipped with this state-of-the-art technology the fan is virtually inaudible when operated in mid-speed. 3 DIFFERENT MOUNTING OPTIONS For any purpose Silent Wings Pro 4 120mm PWM has 3 mounting options in the scope of delivery. The pre-installed radiator corners are specially designed for radiators on which the incomparable performance of this high-end fan completely shines. On the other hand, for chassis use, the anti-vibration mounting is the first choice as they reduce vibrations to a minimum. The plastic mountings round up the scope. FLUID-DYNAMIC BEARING For a sustainable operation The advanced fluid-dynamic bearing (FDB) enables a super long fan life of up to 300,000 hours. In addition, it reduces the vibrations significantly and supports the virtually inaudible operation of Silent Wings Pro 4 120mm PWM. ELEGANT LOOK Magnificent appearance in all details The all-black design combined with a high-grade fan sticker makes Silent Wings Pro 4 120mm PWM a highlight in any system. The finely sleeved PWM cable perfectly rounds up the outer appearance of the fan. Not only does the PWM cable look great: its connector can also be plugged in and out with ease, making the fan an eye-catcher and user-friendly alike.
be quiet! Light Wings Triple Pack of 120mm PWM Chassis Fans
53.94 GBP
3 Light Wings 120mm PWM offer impressive illumination for a vibrant unique look, strong performance and quiet operation with efficient cooling. If you are looking for quiet case fans with an impressive look from every angle, these 3 Light Wings 120mm PWM are your fans of choice. IMPRESSIVE LIGHTING Lots of illumination possibilities Light Wings 120mm PWM offers ARGB lighting at the front and rear. The subtly lit ring at the back combined with the bright one at the front make for a magnificent appearance from every angle. 18 ARGB LEDs give you many opportunities to individualize your PC build. THREE FANS, ONE HUB Synchronize up to six Light Wings simultaneously An ARGB Hub allows to use and synchronize up to 6 ARGB components at the same time. A user-friendly installation makes for an easy and convenient process, while the elegant all-black design of the ARGB Hub visually suits any PC case. It can be mounted like an SSD or anywhere else using the double-coated adhesive tape supplied. PERFECT CASE FAN Fan blades optimized for high airflow With optimization for maximum airflow, Light Wings 120mm PWM is the right choice for any case configuration that demands high cooling performance. Its 7 airflow-optimized fan blades not only reduce noise-generating turbulences, but also ensure Light Wings 120mm PWM provides the performance that is needed, even in demanding configurations. VERY QUIET OPERATION Acclaimed be quiet! low noise level A highly optimized fan frame and impeller achieve the silent operation be quiet! is famous for. With a noise level of just 20.6dB(A) at maximum fan speed, it proves that instead of being a replacement the lighting is an addon to very silent and very powerful operation. All features combine to make Light Wings 120mm PWM the fan of choice for silent show cases and gaming systems alike. VARIABLE FAN SPEED FUNCTION Adjusts the fan speed and associated noise level Pulse Width Modulation (PWM) allows compatible 4-pin controllers, including those built into many motherboards, to intelligently vary the speed and thus the noise level of the fan. With PWM the system can ramp up the cooling when it’s needed, or operate in maximum quiet mode when it’s not.
be quiet! Light Wings Triple Pack of 120mm PWM High-Speed Chassis Fans
53.94 GBP
3 Light Wings 120mm PWM high-speed offer impressive illumination for a vibrant unique look, strong performance and quiet operation with efficient cooling. If you are looking for quiet case fans with an impressive look from every angle, these three Light Wings 120mm PWM high-speed are your fans of choice. IMPRESSIVE LIGHTING Lots of illumination possibilities Light Wings 120mm PWM high-speed offers ARGB lighting at the front and rear. The subtly lit ring at the back combined with the bright one at the front make for a magnificent appearance from every angle. 18 ARGB LEDs give you many opportunities to individualize your PC build. THREE FANS, ONE HUB Synchronize up to six Light Wings simultaneously An ARGB Hub allows to use and synchronize up to six ARGB components at the same time. A user-friendly installation makes for an easy and convenient process, while the elegant all-black design of the ARGB Hub visually suits any PC case. It can be mounted like an SSD or anywhere else using the double-coated adhesive tape supplied. FOR RADIATORS AND HEATSINKS Fan blades optimized for high pressure With a remarkably high air pressure of up to 2.6mm/H2O, Light Wings 120mm PWM high-speed is the best choice for water-cooled and air-cooled systems alike. The nine airflow-optimized fan blades provide enough air pressure to make this fan perfect, even in demanding configurations. QUIET OPERATION Acclaimed be quiet! low noise level A highly optimized fan frame and impeller achieve the silent operation be quiet! is famous for. With a noise level of just 31dB(A) at maximum fan speed, it proves that instead of being a replacement the lighting is an addon to silent and very powerful operation. All features combine to make Light Wings 120mm PWM high-speed the fan of choice for silent show cases and gaming systems alike. VARIABLE FAN SPEED FUNCTION Adjusts the fan speed and associated noise level Pulse Width Modulation (PWM) allows compatible 4-pin controllers, including those built into many motherboards, to intelligently vary the speed and thus the noise level of the fan. With PWM the system can ramp up the cooling when it’s needed, or operate in maximum quiet mode when it’s not.
be quiet! Light Wings 120mm PWM High-Speed Chassis Fan
31.94 GBP
Light Wings 120mm PWM high-speed offers impressive illumination for a vibrant unique look, strong performance and quiet operation with efficient cooling. If you are looking for a high performance fan with an impressive look from every angle, Light Wings 120mm PWM high-speed is your fan of choice. IMPRESSIVE LIGHTING Lots of illumination possibilities Light Wings 120mm PWM high-speed offers ARGB lighting at the front and rear. The subtly lit ring at the back combined with the bright one at the front make for a magnificent appearance from every angle. 18 ARGB LEDs give you many opportunities to individualize your PC build. FOR RADIATORS AND HEATSINKS Fan blades optimized for high pressure With a remarkably high air pressure of up to 2.6mm/H2O, Light Wings 120mm PWM high-speed is the best choice for water-cooled and air-cooled systems alike. The 9 airflow-optimized fan blades provide enough air pressure to make this fan perfect, even in demanding configurations. QUIET OPERATION Acclaimed be quiet! low noise level A highly optimized impeller achieves the silent operation be quiet! is famous for. With a noise level of 31dB(A) at maximum fan speed, it proves that instead of being a replacement the lighting is an addon to silent and very powerful operation. All features combine to make Light Wings 120mm PWM high-speed the fan of choice for silent show cases and gaming systems alike. VARIABLE FAN SPEED FUNCTION Adjusts the fan speed and associated noise level Pulse Width Modulation (PWM) allows compatible 4-pin controllers, including those built into many motherboards, to intelligently vary the speed and thus the noise level of the fan. With PWM the system can ramp up the cooling when it’s needed, or operate in maximum quiet mode when it’s not.
Be Quiet! Be Quiet Pure Wings 3 PWM 120mm Chassis Fan in White
19.94 GBP
OPTIMIZED TO THE MAX For unprecedented air pressure in its class The fan frame outlet is newly designed to minimize air leaks. This benefits especially the radiator performance of Pure Wings 3 120mm PWM. To reach even higher performance, the fan blades are optimized as well: Their angle is adjusted to achieve even more air pressure, adding up to the extraordinary performance of Pure Wings 3 120mm PWM. PERFECT CASE FAN Fan blades optimized for high airflow With optimization for maximum airflow, Pure Wings 3 120mm PWM is the right choice for any case configuration that demands high cooling performance. Its 7 airflow-optimized fan blades not only reduce noise-generating turbulences but also ensure Pure Wings 3 120mm PWM provides the performance that is needed, even in demanding configurations. ICONIC DESIGN Streamlined look makes it an instant timeless classic Pure Wings 3 120mm PWM trims all the fat. Every part and single detail contribute to the functionality and uncompromising performance. This has also been considered in the design of the fan. All outlines and angles serve a purpose, making Pure Wings 3 120mm PWM a timeless classic and elegant addition to every gaming PC. RIFLE BEARING TECHNOLOGY Makes Pure Wings 3 a long-lasting companion Pure Wings 3 120mm PWM is built to last. With the proven rifle bearing technology, on average, this fan offers a lifespan of 80,000 hours.
be quiet! Silent Wings 4 120mm High-Speed PWM Chassis Fan
24.94 GBP
NO COMPROMISE SILENCE AND PERFORMANCE Equally quiet and performant operation Silent Wings 4 120mm PWM high-speed is the fan of choice for all possible operations. Be it in a case, on radiators or heat sinks – Features like the silence-optimized fan blades and the funnel shaped fan frame make Silent Wings 4 120mm PWM high-speed a fan that makes no compromises between very quiet operation and highest performance. OPTIMIZED FOR HIGH-END PERFORMANCE Minimum tolerances for maximum air pressure Silent Wings 4 120mm PWM high-speed makes for extraordinary air pressure and, therefore, significant increases in the system’s performance. The decreased distance between the fan blades and the frame makes it possible. By that, the Silent Wings 4 120mm PWM high-speed allows the user to run even the most demanding applications. DIFFERENT MOUNTING OPTIONS For any purpose Silent Wings 4 120mm PWM high-speed has 2 mounting options in the scope of delivery. The pre-installed anti-vibration mounting reduces noise-generating vibrations to a minimum. For radiators and heat sinks, the plastic mounting is the first choice. Both solutions have in common that they enable virtually inaudible operation at regular speed. 6-POLE FAN MOTOR The key for virtually inaudible operation when needed 6-pole fan motor with 3 phases for very low power consumption, less vibration and therefore quiet max. operation of 31.2dB(A). Equipped with this state-of-the-art technology the fan is virtually inaudible when operated in mid-speed. FLUID-DYNAMIC BEARING For a sustainable operation The advanced fluid-dynamic bearing (FDB) enables a super long fan life of up to 300,000 hours. In addition, it reduces the vibrations significantly and supports the virtually inaudible operation of Silent Wings 4 120mm PWM high-speed. ELEGANT LOOK Magnificent appearance from all angles Be it as a radiator fan or in the case: Silent Wings 4 120mm PWM high-speed always makes a good impression. The all-black design combined with the high-grade fan sticker makes the fan shine in any system. This makes Silent Wings 4 120mm PWM high-speed a high performant and an incredibly good-looking fan.
Corsair RS120 120mm PWM Chassis Fan in White
13.94 GBP
Add a CORSAIR RS120 120mm PWM Fan to your cooling setup – daisy-chained 4-pin PWM connectors let you link to your other RS fans and control them all through just a single 4-pin PWM header on your motherboard. Enjoy fan speeds up to 2,100 RPM, with the static pressure to also serve as radiator fans. CORSAIR AirGuide technology with anti-vortex vanes directs airflow for concentrated, powerful cooling. Magnetic Dome bearings ensure quieter operation and increased longevity, while Zero RPM mode offers silent operation at low loads.
DeepCool FL12R-3 IN 1 120mm ARGB PWM Triple Chassis Reverse Fan Pack
67.94 GBP
A LUMINOUS HALO FL12R integrates a total of 36 ARGB Gen2 LEDs, with the halo ring elevating its design aesthetics to a whole new level. REVERSE FAN BLADE Say goodbye to the "cross" on the other side - now you can use the fan as an intake fan and enjoy an uninterrupted RGB look on both intake and exhaust. UNCOMPROMISED PERFORMANCE Equipped with a long-life fluid dynamic bearing. The FL12R PWM fans boast exceptional cooling specs while remaining relatively quiet. DURABLE MATERIALS The entire structure and dynamic balance are further strengthened by using an enhanced composite material based on PBT for the frames and polycarbonate for the fan blades. SECURE CONNECTION The 8-pin connectors, integrated with PWM and ARGB SYNC, provide a more accessible and safer user installation experience. REDUCED VIBRATIONS Full-coverage rubber pads at each corner guarantee minimal fan vibration and ensure that noises resulting from uneven mounting pressure are minimized.
DeepCool FT12 120mm PWM Chassis Fan in Black
21.94 GBP
ENGINEERING PERFECTION Each FT12 120mm fan features a powerful 3-phase, 10-pole, 12-slot FOC closed-loop control motor with high-quality MQ magnets. A design combination rarely found in case fans that minimizes vibrations by reducing the force produced between wide gaps between poles and slots. QUALITY YOU CAN SEE Don't just believe the marketing pitch; each FT12 fan has a transparent window that showcases the high-quality engineering of the fan motor while putting the true Fluid Dynamic Bearing on display. Subtle white LEDs are positioned behind the bearing to highlight every detail and can be turned off with a quick flick of a tiny switch in the rear of the fan hub frame. ENHANCED MATERIALS By utilizing an enhanced composite material made up of a fine mix of fiberglass and PBT, the fan blades and frame are extremely consistent, which also reduces the overall sound profile. IMPRESSIVE IN MANY ASPECTS All of the research and development results in an impressive performance fan package that focuses on outstanding airflow, concentrated static pressure, and relatively quiet operation. REDUCED VIBRATIONS Full-coverage rubber pads at each corner guarantee minimal fan vibration and ensure that noises resulting from uneven mounting pressure are minimized. OUTSTANDING COVERAGE DeepCool is so confident in the design of the FT series of fans that we provide five full years of limited warranty coverage.
DeepCool FL12R WH-3 IN 1 120mm ARGB PWM Triple Chassis Reverse Fan
65.94 GBP
A LUMINOUS HALO FL12R WH integrates a total of 36 ARGB Gen2 LEDs, with the halo ring elevating its design aesthetics to a whole new level. REVERSE FAN BLADE Say goodbye to the "cross" on the other side - now you can use the fan as an intake fan and enjoy an uninterrupted RGB look on both intake and exhaust. UNCOMPROMISED PERFORMANCE Equipped with a long-life fluid dynamic bearing. The FL12R WH PWM fans boast exceptional cooling specs while remaining relatively quiet. DURABLE MATERIALS The entire structure and dynamic balance are further strengthened by using an enhanced composite material based on PBT for the frames and polycarbonate for the fan blades. SECURE CONNECTION The 8-pin connectors, integrated with PWM and ARGB SYNC, provide a more accessible and safer user installation experience. REDUCED VIBRATIONS Full-coverage rubber pads at each corner guarantee minimal fan vibration and ensure that noises resulting from uneven mounting pressure are minimized.
AWD-IT ARCTIC P12 - 120 mm Case Fan, Pressure-optimised, Computer, Fan Speed: 1800 RPM - Black, Black - ACFAN00118A
8.95 GBP
During the development of the new P12, special emphasis was placed on a focused airstream and thus a high static pressure. The fan assures extremely efficient cooling, even with increased air resistance. Therefore, the P12 is particularly suitable for use on heatsinks and radiators.
APNX FP1 120mm ARGB PWM Chassis Fan in Black
15.94 GBP
Superior Cooling Performance The impressive 30mm fan width brings you a 30-50% boost in cooling power compared to standard 25mm fans, keeping your components running smoothly. More Efficient AirFlow FP1 reaches an impressive and efficient 86.9 CFM airflow with up to 1600 RPM. A Virtuoso of Ventilation Larger fan blades improve airflow to dissipate more heat, leaving your system in a state of Zen-like tranquility. Jaw-Dropping Aesthetics with ARGB The elegant frame of FP1 and the ARGB lightshow encased inside promise to complement any build. In addition, have the power to turn the lighting on or off at will. Ultra Thick Shock-Absorbing Pad Stability matters, and we’ve got you covered. Each APNX FP1 fan comes with an ultra thick shock-absorbing pad so your fan stays securely in place.
CiT Celsius 120mm ARGB PWM Chassis Fan in Black
10.94 GBP
The CiT Celsius has a stylish and sleek look and has been optimised for airflow with its nine-blade design. This fan will complement any PC, the new generation in cooling has arrived. This fan is perfect for anyone looking to have a fan that is aesthetically pleasing and solidly constructed. Equipped with 21 integrated ARGB LEDs which creates a vivid lightning display. Finished off with a stunning infinity mirror LED effect in the centre of the fan offers stunning lightning displays and adds a real dynamism to your aesthetic. This stylish dual-ring fan is available in black or white and with a speed ranging from 800-1500 RPM and airflow of 30.46 CFM. Daisy-chain multiple units via the ARGB fans male and female Aura connectors. As a PWM fan (Pulse-Width Modulation) it’s rotation speed can be user controlled by connecting the fan to a compatible motherboard or a compatible controller. As a result, users can choose whether they want the fan to run quietly or have enhanced airflow. Courtesy of the 3pin 5V header, this 120mm fan is compatible with Motherboard software such as ASUS AURA Sync, MSI Mystic Light Sync, Gigabyte Fusion 2.0 and ASRock RGB LED and customise your LED lighting even further with a wide array of vivid effects and patterns. With excellent attributes, the Celsius fan frame and fan blades are crafted using the best materials to ensure strength and stability and incorporating hydraulic bearing, extended fan life to 30,000 MTBF. Made for those seeking a quiet operation and off the scale lighting the Celsius is a fan ready to unite your set up.
Lian-Li UNI FAN SL Wireless LCD 120mm ARGB PWM Chassis Fan in Black
43.94 GBP
The UNI FAN SL Wireless series has made another revolutionary breakthrough in making cable management easier and unifying controllers across different devices. The UNI FAN SL Wireless utilizes a 2.4 GHz wireless signal to control its lighting effects and fan speed to further improve your PC building experience. WIRELESS CONTROL, EASY INSTALLATION The revolutionary 2.4GHz L-wireless controller greatly simplifies the installation experience of UNI FAN SL Wireless Series (sold separately). Based on user experience and continuous research, we newly designed a L-Wireless controller. The L-Wireless controller connects to the motherboard, and transmits a 2.4GHz signal to the fan, enabling the wireless control of the LED lighting effects and fan speed for the UNI FAN SL Wireless Series. *Note: LCD still needs to transmit through a USB 9-pin cable. Power each group of fans by connecting the PWM cable on the receiver to the motherboard (the LCD version also requires a separate USB connection for signal transmission). The cable length can be shorten by winding it around the organizer on the receiver. Adopting a wireless solution minimizes the number of cables, and simplifies cable management while avoiding occupying the few available USB 2.0 ports on the motherboard. This allows users to connect more devices without restriction. PERSONALIZED REMIX, STYLE ON DISPLAY UNI FAN SL Wireless LED and LCD now can be mix-matched into a group, empowering users to unleash their creativity and freely combine them. ADDITIONAL LIGHT STRIP, ENHANCED VISUAL EXPERIENCE The UNI FAN SL Wireless series not only shows innovation in functionality but also enhances its visual appeal. Each side of the fan now features an additional light strip, increasing the total number of LEDs to 40. This enables duo-zoned lighting adjustments, delivering a more dynamic and versatile visual experience that truly stands out. PRACTICAL AND STYLISH LCD SCREEN Building on the unique design of the UNI FAN TL LCD, the world’s first LCD-integrated fan, the UNI FAN SL Wireless LCD features the same 1.6” LCD screen. With seamless integration into the L-Connect 3 software, users have the flexibility to customize the display to showcase their preferred content, offering a highly personalized experience. PERFORMANCE DETAIL AT A GLANCE Monitor the temperature and load of your CPU and GPU, as well as the fan speed, instantly with built-in hardware monitor dashboards on the screen. In a scenario of a cluster of 3 LCD fans, you can simultaneously monitor a variety of data, stay informed and in control of your system. BREEZE YOUR SYSTEM UNI FAN SL Wireless series features FDB bearing, ensuring long-term high-speed operation at a lower noise level. LCD and LED versions can reach fan speeds of up to 1900 RPM and 2100 RPM, respectively.
Noctua NF-S12A PWM Ultra Quiet 120mm PWM Cooling Fan
25.94 GBP
Specifically conceived for pressure demanding applications such as CPU cooling, the classic NF-P12 120mm fan helped to found Noctua’s reputation as a top-tier manufacturer of premium quality quiet cooling components and still impresses users with its exquisite quietness and superb performance. The NF-S12A marks the third generation of Noctua’s signature S12 series quiet case fans, which have received more than 250 awards and recommendations from the international press. Featuring a further refined blade design with Anti-Stall Knobs that works in tandem with the new AAO or Advanced Acoustic Optimisation frame. The NF-S12A improve s the airflow/noise efficiency of its renowned predecessor by up to 8%. The PWM version sports Noctua’s custom designed NE-FD1 IC for fully automatic speed control via 4-pin fan headers and comes with a Low-Noise-Adaptor to reduce the maximum speed during PWM control from 1200 to 900rpm. Its superb running smoothness, and Noctua’s trusted premium quality make it an elite choice for quiet case cooling. Specifications Size120 x 120 x 25 mm BearingSSO-Bearing Connector4-Pin PWM Blade GeometryS-Series with Anti-Stall Knobs Maximum Rotational Speed ±10%1200 PRM Maximum Rotational Speed ±10% with L.N.A. ±10%900 RPM Maximum Airflow62.21 CFM Maximum Airflow with L.N.A.48.96 CFM Maximum Acoustical Noise17.8 dB(A) Maximum Acoustical Noise with L.N.A.10.7 dB(A) Maximum Static Pressure1.19 mm H2O Maximum Static Pressure with L.N.A.0.73 mm H2O Input Power1.44 W Input Current0.12 A Voltage Range12 V MTBF> 150.000 h Warranty72 months - See more at: http://www.quietpc.com/nf-s12a-pwm#sthash.ZIZ4Xyy8.dpuf Size 120 x 120 x 25 mm Bearing SSO-Bearing Connector 4-Pin PWM Blade Geometry S-Series with Anti-Stall Knobs Maximum Rotational Speed ±10% 1200 PRM Maximum Rotational Speed ±10% with L.N.A. ±10% 900 RPM Maximum Airflow 62.21 CFM Maximum Airflow with L.N.A. 48.96 CFM Maximum Acoustical Noise 17.8 dB(A) Maximum Acoustical Noise with L.N.A. 10.7 dB(A) Maximum Static Pressure 1.19 mm H2O Maximum Static Pressure with L.N.A. 0.73 mm H2O Input Power 1.44 W Input Current 0.12 A Voltage Range 12 V MTBF > 150.000 h Warranty 72 months