Trend H/JIG/C 2 Part Skeleton Hinge Jig
272.62 GBP
Consult the complete sheet with in-depth details, compare prices and identify the features of PRODUCTNAME, available at the cost of PRICE CURRENCY; it belongs to the CATEGORY NAME category; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
HJIGC-2-Part-Skeleton-Hinge-Jig-Trend-H-JIG-C-p-The-Trend-Skeleton-Hinge-Jig-is-a-2-part-adjustable-portable-template-set-designed-for-recessing-hinges-in-wooden-doors-and-frames-with-a-router-It-is-easy-to-use-with-minimal-setting-up-time-ensuring-that-the-job-can-be-completed-accurately-and-quickly-It-is-ideal-for-use-on-site-and-in-joinery-shops-to-increase-productivity-with-excellent-results-p-p-The-jig-has-fully-adjustable-apertures-for-fire-door-requirements-and-renovation-wor
EAN: 5027654559734
Shipping Costs: 0 GBP
Availability: in stock
Delivery Times: 2-4 Days
Condition: new
HJIGC-2-Part-Skeleton-Hinge-Jig-Trend-H-JIG-C-p-The-Trend-Skeleton-Hinge-Jig-is-a-2-part-adjustable-portable-template-set-designed-for-recessing-hinges-in-wooden-doors-and-frames-with-a-router-It-is-easy-to-use-with-minimal-setting-up-time-ensuring-that-the-job-can-be-completed-accurately-and-quickly-It-is-ideal-for-use-on-site-and-in-joinery-shops-to-increase-productivity-with-excellent-results-p-p-The-jig-has-fully-adjustable-apertures-for-fire-door-requirements-and-renovation-wor
EAN: 5027654559734
Shipping Costs: 0 GBP
Availability: in stock
Delivery Times: 2-4 Days
Condition: new
Comparison of similar products
Trend H/JIG/A 2 Part Hinge Jig Door Hinge Template Door Hanging Guide Door Frame
215.99 GBP
General description A 2-part hinge jig, portable template set designed for recessing hinges in wooden doors and frames. It is easy to use with minimal setup time, completing the job both accurately and quickly. This jig is used on-site and in joinery shops to increase productivity with excellent results. It features four apertures for fire door requirements and eliminates the need for conventional marking out. Quick and simple to set up, the hinge serves as the pattern, ensuring clean and accurate recesses every time. Technical specifications Hinge sizes possible: Length min: 2 5/8 in (67 mm) Length max: 5 in (127 mm) Width min: 3/8 in (9.5 mm) Width max: 1 3/8 in (35 mm) Door sizes possible: Height min: 6 ft 5 in (1955 mm) Height max: 6 ft 10 in (2100 mm) Thickness min: 5/8 in (16 mm) Router compatibility: Light-duty router with 1/4 inch collet Required router cutter: Long reach, 12 mm diameter with 70 mm overall length Patent No.: GB2285410 Compatibility and accessories Suitable for
Trend H/JIG/C Skeleton Hinge Jig
384.99 GBP
Can be used on both inside and outside doors, and on maximum 25mm thick fixed stops.
Trend H/JIG/A Hinge Jig Two Part in Case
374.99 GBP
A two-part aluminium hinge jig portable template set designed for recessing hinges in wooden doors & frames. It is easy to use with minimal setting-up time, completing the job both accurately & quickly. Used on-site & in joinery shops to increase productivity with excellent results.
Trend Contractor Two Part Hinge Jig
375.9 GBP
The two part Contractor Hinge Jig is a portable template set designed for recessing hinges in wooden doors & frames using a plunge router. It is easy to use with minimal setting-up time, completing the job both accurately & quickly. Used on-site & in joinery shops to increase productivity with excellent results. Four apertures for fire door requirements. No need for marking out in the conventional way. Quick & simple to set-up as the hinge is used as the pattern. Clean & accurate recesses are achieved every time. Suitable for timber based doors & square butt hinges. Can be used on both inside and outside doors, rebated frames and on maximum 25mm thick fixed stops. Use with a light duty plunge router with 1/4 inch collet. Long reach router cutter required, 12mm diameter with 70mm overall length. Angled position slots to prevent creep. Unibase may be needed. T4EK router requires a ref. UNIBASE or special guide bush ref. GB/T4/160. Contents: 4 x Apertures 2 x Bradawls with spacer 1 x 16mm guide bush 1 x T-Handle hex key 4mm 1 x 4mm spacing gauge 1 x Carry case
H/jig/c Hinge Jig Skeleton two part in case - Trend
250 GBP
General description The Trend H/JIG/C Hinge Jig Skeleton is a two-part adjustable portable template set designed for recessing hinges in wooden doors and frames using a router. It is easy to use with minimal setup time, allowing for accurate and quick completion of jobs. This jig is ideal for on-site use and in joinery shops, enhancing productivity with excellent results. It features fully adjustable apertures suitable for fire door requirements and renovation work, making it perfect for fitting a new door into an old frame. Technical specifications Hinge sizes possible: Minimum length: 67 mm (2.5/8 in), Maximum length: 127 mm (5 in) Minimum width: 12.7 mm (1/2 in), Maximum width: 35 mm (1.3/8 in) Door sizes possible: Minimum height: 1956 mm (6 ft 5 in), Maximum height: 2100 mm (6 ft 10 in) Minimum thickness: 16 mm (5/8 in), Maximum thickness: 51 mm (2 in) Weight: 2.9 kg Overall length: 1956 mm Preset hinge sizes: 20 mm, 25 mm, and 30 mm Compatibility and accessories Suitable for
Trend - c/chisel Corner Chisel Quick Lock Face Hinge Recess Square Off Jig Tool
25.94 GBP
General description The Trend C/CHISEL Corner Chisel is a versatile tool designed for precise woodworking tasks, such as squaring corners in hinge and lock recesses. It allows a rounded recess in wood to be cut to a square recess using a hammer, making it ideal for squaring hinge recesses in door frames and door edges, as well as lock faceplates. The chisel helps achieve clean, professional results in carpentry, door installation, cabinetry, and DIY projects. Technical specifications Blade Material: High-carbon steel Design: Self-aligning, spring-loaded Size and weight: Compact and lightweight for easy handling Compatibility and accessories Compatible with standard woodworking and carpentry tools Suitable for use with hammers or mallets for operation Installation Position the chisel in the rounded recess or corner to be squared Align the tool properly for accurate results Tap gently with a hammer or mallet to achieve a clean, square corner Usage Use for squaring rounded or uneven
Ph/jig/c Twin Pocket Hole Jig trephjigc - Trend
56.12 GBP
General description This is a pocket hole jig designed for creating strong, precise joints in woodworking projects. It is suitable for DIY enthusiasts and professionals alike, providing an efficient way to drill angled holes for joinery. Technical specifications Type: Pocket hole jig Material: Durable plastic and metal components Suitable for: Woodworking projects requiring pocket holes Features: Adjustable settings for different thicknesses, twin jig design for versatility Drilling capacity: Materials from 12.7mm to 38mm thick Compatibility and accessories Compatible with various drill bits and screws designed for pocket hole joinery Includes twin jigs for multiple applications Supplied with a high-quality HSS stepped drill, No.2 Square Drive bit, both with quick-change hex shanks, and a selection of screws Installation Attach the jig securely to the workpiece using clamps or screws Adjust the settings according to the thickness of the material Insert the drill bit into the jig and
Trend - GB160 16mm Diameter Hinge Jig Guide Bush Router Template Jig Guide Bush
16.89 GBP
General description Trend GB160 Guide Bush is designed to be attached to the base of a router, allowing it to follow the contours of a template effectively. This guide bush is essential for precise routing tasks, ensuring that the router is guided accurately when using a template. Technical specifications Outside diameter: 16mm Inside diameter: 14mm Projection from plate: 10mm Manufacturer Part Number (MPN): GB160 EAN: 5027654505786 Compatibility and accessories Fits directly to Trend routers: T3, T4, T5, T5 MK2, T9, T10, and T11 Compatible with other makes when used with GB/5, GB/PLATE, or UNIBASE Sub-base Other information
Trend PH/JIG/C PH/JIG/C Twin Pocket Hole Jig
61.31 GBP
PH-JIG-C-Twin-Pocket-Hole-Jig-Trend-PH-JIG-C-p-Trend-PH-JIG-C-Twin-Pocket-Hole-Jig-for-new-projects-strengthening-and-repair-work-in-materials-from-12-7mm-to-38mm-thick-With-hardened-full-length-drill-guides-for-precision-pockets-and-a-long-life-span-A-magnetic-clamp-plate-aids-location-of-the-jig-when-clamping-p-p-Fast-setup-with-easy-adjustments-for-different-component-sizes-It-can-be-easily-relocated-across-any-material-width-for-infinite-pocket-hole-positioning-The-quick-set-d
Trend HINGE/JIG Hinge Jig
272.62 GBP
Hinge-Jig-Trend-HINGE-JIG-p-The-Trend-Hinge-Jig-is-a-portable-template-set-designed-for-recessing-hinges-in-wooden-doors-and-frames-Used-on-site-and-in-joinery-shops-to-increase-productivity-with-excellent-results-Four-apertures-for-fire-door-requirements-No-need-for-marking-out-in-the-conventional-way-Quick-and-simple-to-set-up-as-the-hinge-is-used-as-the-pattern-p-p-Clean-and-accurate-recesses-are-achieved-every-time-Suitable-for-timber-based-doors-and-square-butt-hinges-Use-wit
Trend Contractor One Piece Hinge Jig
337.9 GBP
The single piece Contractor Hinge Jig is designed for recessing hinges in wooden doors & frames with a plunge router. It is easy to use with minimal setting-up time, completing the job both accurately & quickly. Used on-site & in joinery shops to increase productivity with excellent results. Four apertures for fire door requirements. No need for marking out in the conventional way. Quick & simple to set-up as the hinge is used as the pattern. Clean & accurate recesses are achieved every time. Suitable for timber based doors & square butt hinges. Can be used on both inside and outside doors, rebated frames and on maximum 25mm thick fixed stops. Use with a light duty plunge router with 1/4 inch collet. Long reach router cutter required, 12mm diameter with 70mm overall length. Angled position slots to prevent creep. Unibase may be needed. T4EK router requires a ref. UNIBASE or special guide bush ref. GB/T4/160. Contents: 4 x Apertures 2 x Bradawls with spacer 1 x 16mm guide bush 1 x T-Handle hex key 4mm 1 x 4mm spacing gauge 1 x Plastic storage tube Features and Benefits • Four apertures for fire door requirements • No need for marking out in the conventional way • Quick & simple to set-up as the hinge is used as the pattern • Clean & accurate recesses are achieved every time • Suitable for timber based doors & square butt hinges • Can be used on both inside and outside doors, and on maximum 25mm thick fixed stops • Use with a light duty plunge router with 1/4" collet Contents • Contractor Hinge Jig • 4 x Apertures • 2 x Bradawls with spacer • 1 x 16mm guide bush • 1 x T-Handle hex key • 1 x 4mm spacing gauge • 1 x Plastic storage tube
Trend - 3/8LX1/4TC 3/8L x 1/4 tct Two Flute Hinge Jig Router Cutter 12.0 x 19mm
40.5 GBP
General description Trend two flute hinge jig cutters feature extra long shanks designed for deep grooving, rebating, and morticing. These cutters are particularly useful for template work when the thickness of the template restricts the depth of cut. The two flute TCT (Tungsten Carbide Tipped) design ensures good chip clearance, making them ideal for shallow lateral routing cuts, such as recessing hinges. For best results, corners should be finished with a hand chisel or a corner chisel. Technical specifications Cutter diameter (C): 12 mm Cutting length (D): 19 mm Overall length (OL): 66 mm Usage Take more passes than usual to avoid breakage. Only cut up to half the diameter of the cutter in one pass. Other information Compatible with Trend Hinge & Lock Jigs.
Trend - C153X1/2TC C153 x 1/2 tct Two Flute Kitchen Worktop Cutter 12.7 x 50.0mm
18.95 GBP
General description The Trend C153 x 1/2 TCT Two Flute Kitchen Worktop Cutter is a high-quality woodworking tool designed for cleaner cuts and efficient waste removal in various timber and timber-based materials. Featuring two flute carbide TCT tips, this cutter is ideal for heavy-duty applications such as engraving, grooving, rebating, and shallow morticing. Its bottom cut feature allows for plunge work, making it versatile for different woodworking tasks. Technical specifications Cutting Diameter: 12.7mm (1/2 inch) Cutting Depth: 50mm (2 inches) Overall Length: 93.5mm Shank Diameter: 1/2 inch Compatibility and accessories Compatible with larger routers and router tables Works with various woodworking jigs and fixtures for grooving, rebating, and morticing Installation Ensure the router is turned off and unplugged before installation Insert the cutter into a compatible collet, ensuring it is securely tightened Verify the cutter is properly aligned and stable before use Usage Use on
Hotpoint H7IHP42LUK Fully Integrated Full Size Dishwasher - Black Control Panel with Fixed Door Hinge Kit - C Rated, Black
379 GBP
Been avoiding the washing up? This Hotpoint dishwasher sees to the clean-up, so you don't have to. The clever 3D Zone Wash removes stubborn grime from pans, with two spray arms for a thorough clean. And thanks to the Maxi Space tub, you've got more room on each rack, without having to buy a larger dishwasher. The second rack can move up and down too, making it easier to fit bulky items in the bottom. Then when everything's sparkling, ActiveDry opens the door automatically, so your glasses and cutlery dry off naturally, ready to be put away again.
Trend - C152X1/2TC 1/2 tct Bearing Guided Biscuit Jointer Cutter 4.0 x 37.2mm Bit
46.44 GBP
General description This biscuit jointer set is designed for creating precise biscuit joints in woodworking projects. It features two-flute carbide TCT tips for clean cuts and is supplied with three interchangeable bearings to accommodate different biscuit sizes. The cutter has a diameter of 37.2 mm and a cutting length of 4 mm, suitable for various timber and furniture applications. Its PTFE non-stick coating reduces heat and resin buildup, enhancing performance and durability. The 1/2-inch shank makes it compatible with larger routers, ideal for professional and heavy-duty use. Technical specifications Diameter: 37.2 mm Cutting length: 4 mm Shank diameter: 1/2 inch Overall length: approximately 64 mm Bearings included: 12.7 mm for biscuit sizes 0, 10, and 20 Tip material: Tungsten carbide TCT Coating: PTFE non-stick Compatibility and accessories Compatible with larger routers and heavy-duty woodworking tools Supplied with three bearings for biscuit sizes No. 0, No. 10, and No. 20
Trend H/JIG/A 2 Part Hinge Jig with x2 12x70mm Cutters Door Hinge Template
249.95 GBP
General description A 2-part hinge jig, portable template set designed for recessing hinges in wooden doors and frames. It is easy to use with minimal setup time, completing the job both accurately and quickly. This jig is used on-site and in joinery shops to increase productivity with excellent results. It features four apertures for fire door requirements and eliminates the need for conventional marking out. Quick and simple to set up, the hinge serves as the pattern, ensuring clean and accurate recesses every time. Suitable for timber-based doors and square butt hinges. Technical specifications Hinge sizes possible: Length min: 2 5/8 in (67 mm) Length max: 5 in (127 mm) Width min: 3/8 in (9.5 mm) Width max: 1 3/8 in (35 mm) Door sizes possible: Height min: 6 ft 5 in (1955 mm) Height max: 6 ft 10 in (2100 mm) Thickness min: 5/8 in (16 mm) Router cutter: 12 mm diameter with 70 mm overall length Router type: Light-duty router with 1/4 inch collet Usage Ideal for shallow lateral
Trend Two Flute 12mm Cutter for the Trend Hinge Jig 12mm 19mm 1/4"
44.9 GBP
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 1/4 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 19 • Overall Length Metric: 70
Trend - C172 x 1/2 tct Two Flute Cutter 12.0 x 63.0mm TREC17212TC
35.19 GBP
General description The Trend C172 x 1/2 TCT Two Flute Cutter is a high-quality router bit designed for precise and efficient cutting in various woodworking applications. It features two flutes with carbide TCT tips for cleaner cuts and fast waste removal. This cutter is suitable for a wide range of materials including softwoods, hardwoods, MDF, plywood, and chipboard, ensuring smooth and accurate results. Technical specifications Cutting Diameter: 12mm (15/32 inch) Cutting Depth: 63mm (2.1/2 inch) Overall Length: 115mm Shank Diameter: 1/2 inch Material: Carbide TCT tips with PTFE coating for heat and resin resistance Compatibility and accessories Designed for use with router tables and larger routers Compatible with standard 1/2 inch shank tools Suitable for engraving, grooving, rebating, and shallow morticing Installation Ensure the router is unplugged before installation Insert the cutter into a compatible router with a 1/2 inch shank Tighten securely using the appropriate wrench
Trend C056A x 1/2 TCT Radius Cove Cutter 9.5mm Radius TREC056A12TC
39.48 GBP
General description This Trend C056AX1/2 Radius Cove Cutter is designed for creating decorative radiused grooves on panels and edges. It features two flutes for cleaner cuts and efficient waste removal, making it ideal for decorative mouldings and edge detailing. The cutter is made with microgranular tungsten carbide tips for durability and precision, and it is coated with PTFE to reduce heat and resin build-up, extending its lifespan. Technical specifications Cutting Diameter: approximately 19.1 mm Cutting Depth: up to 32 mm Overall Length: about 80 mm Cutting Radius: 9.5 mm Shank Diameter: 1/2 inch Number of Flutes: 2 Compatibility and accessories Compatible with standard table and handheld routers Designed for use with draining groove jigs Installation Ensure the router is unplugged before installation Insert the cutter into a compatible collet, ensuring it is securely tightened Check that the shank is properly seated for safe operation Usage Use with appropriate jigs for draining
DeWalt Trend Contractor Two Part Hinge Jig
375.9 GBP
The two part Contractor Hinge Jig is a portable template set designed for recessing hinges in wooden doors & frames using a plunge router. It is easy to use with minimal setting-up time, completing the job both accurately & quickly. Used on-site & in joinery shops to increase productivity with excellent results. Four apertures for fire door requirements. No need for marking out in the conventional way. Quick & simple to set-up as the hinge is used as the pattern. Clean & accurate recesses are achieved every time. Suitable for timber based doors & square butt hinges. Can be used on both inside and outside doors, rebated frames and on maximum 25mm thick fixed stops. Use with a light duty plunge router with 1/4 inch collet. Long reach router cutter required, 12mm diameter with 70mm overall length. Angled position slots to prevent creep. Unibase may be needed. T4EK router requires a ref. UNIBASE or special guide bush ref. GB/T4/160. Contents: 4 x Apertures 2 x Bradawls with spacer 1 x 16mm guide bush 1 x T-Handle hex key 4mm 1 x 4mm spacing gauge 1 x Carry case
Hotpoint H2IHD526UK Fully Integrated Full Size Dishwasher - Silver Control Panel with Fixed Door Hinge Kit - E Rated, Silver
269 GBP
Pull the plug on wrinkly, soaked skin after washing up - this Hotpoint dishwasher has got the clean-up covered. It has 9 programmes, so you'll have the right setting to suit any scenario. Sick of noisy machines spoiling your favourite TV shows? Say no more. The brushless Inverter Motor is super quiet, making it ideal for open plan living, or if you prefer putting a load on at night. And the height adjustable top basket gives you all the room you need for bulkier items like chopping boards or bread knives. Now everything can get a thorough clean, and you can enjoy a nice coffee.
Hinge jig - Trend
229.98 GBP
General description The Trend Hinge Jig is a portable template set designed for recessing hinges in wooden doors and frames. It is easy to use with minimal setup time, allowing for quick and accurate completion of the job. This jig is ideal for both on-site use and in joinery shops, enhancing productivity with excellent results. It features four apertures for fire door requirements and eliminates the need for conventional marking out. The setup is quick and simple, as the hinge itself serves as the pattern, ensuring clean and accurate recesses every time. Technical specifications Hinge Sizes Possible: Length Min: 67mm (2 5/8") Length Max: 127mm (5") Width Min: 9.5mm (3/8") Width Max: 35mm (1 3/8") Door Sizes Possible: Height Min: 1955mm (6' 5") Height Max: 2100mm (6' 10") Thickness Min: 16mm (5/8") Thickness Max: 44mm Router Compatibility: Light duty plunge router with 1/4 inch collet Required Router Cutter: Long reach, 12mm diameter with 70mm overall length Patent No.: GB2285410
Trend C030ax1/4 2 Flute Cutter 20.0mm Dia.
28.25 GBP
General description Suitable for a wide range of applications such as engraving, grooving, rebating, and shallow mortising. This cutter is designed for use on softwoods, hardwoods, MDF, plywood, and chipboard. All cutters feature a bottom cut capability. Technical specifications Diameter: 19.1 mm Cutting length: 25.4 mm Flutes: 2
Trend C153 x 1/2 TCT Two Flute Cutter Worktop 12.7 x 50mm
24.22 GBP
C001 x 1/4 TCT Two Flute Cutter 3.2mm x 9.5mm - Trend C153X1/2TC, Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4inSuitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature. D1 1/2 inch D1 12.7 mm Cut length 2 inches Cut length 50 mm Shank Diameter 1/2 inch Trend C153 x 1/2 TCT Two Flute Cutter Worktop 12.7 x 50mm
Trend Two Flute Long Reach Hinge and Lock Jig Router Cutter 12mm 19mm 1/4"
45.9 GBP
Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. Suitable for Trend Hinge & Lock Jigs. Specifications • Shank Diameter: 1/4 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 19 • Overall Length Metric: 70
Trend TEMP/CDH/A Cabinet Door Hinge Template Jig
100.9 GBP
A routing template that allows a router to create a 26mm or 35mm diameter blind hole recess for a circular cabinet door hinge. Cuts an accurate recess for either 26mm or 35mm circular hinges. Adjustable alloy edge guide for adjustment of recess position from top or bottom of door. Removable alloy edge guide for middle hinge recess. 3mm and 5mm location holes to accurately position the recesses relative to the edge of the door. Engraved centre sight lines. Pin holes reversible for left hand and right hand doors. Made from hard wearing 12mm thick high pressure laminate. Requires 12.7mm diameter cutter, 30mm guide bush and two 100mm throat F-clamps. Contents: 1 x Sliding stop 4 x ABS Plastic Pins
Trend C152 x 1/4 TCT Bearing Guided Biscuit Jointer 4.0 x 37.2mm
46.51 GBP
C152 x 1/2 TCT Bearing Guided Biscuit Jointer 4.0 x 37.2mm - Trend C152X1/4TC, This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slighlty longer cut than the length of the biscuit is required for ease of alignment during assembly Supplied with instructions. No. 0 - 45 mm x 15 mm x 4 mm Suitable for 8-12 mm boardsUse bearing B19A 9.05 mm depth No. 10 - 53 mm x 19 mm x 4 mmSuitable for 13-18 mm boardsUse bearing B16A 10.6 mm depth No. 20 - 58 mm x 23 mm x 4 mmSuitable for 19 mm + boardUse bearing B127A D1 37.2 mm Cut length 4 mm B 12.7 mm B2 16.0 mm B3 19.0 mmShank = 1/4in Trend C152 x 1/4 TCT Bearing Guided Biscuit Jointer 4.0 x 37.2mm
Trend C152 x 1/2 TCT Bearing Guided Biscuit Jointer 4.0 x 37.2mm
57.6 GBP
C152 x 1/2 TCT Bearing Guided Biscuit Jointer 4.0 x 37.2mm - Trend C152X1/2TC, This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slighlty longer cut than the length of the biscuit is required for ease of alignment during assembly Supplied with instructions. No. 0 - 45 mm x 15 mm x 4 mm Suitable for 8-12 mm boardsUse bearing B19A 9.05 mm depth No. 10 - 53 mm x 19 mm x 4 mmSuitable for 13-18 mm boardsUse bearing B16A 10.6 mm depth No. 20 - 58 mm x 23 mm x 4 mmSuitable for 19 mm + boardUse bearing B127A D1 37.2 mm Cut length 4 mm B 12.7 mm B2 16.0 mm B3 19.0 mmShank = 1/2in Trend C152 x 1/2 TCT Bearing Guided Biscuit Jointer 4.0 x 37.2mm
Trend 650mm Worktop Jig
100.98 GBP
Tradesman work top jig for up to 650mm worktops. Hard wearing CNC machined Compact Grade High Pressure Laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. Left hand and right hand corners, 400mm radius peninsular joint, 35mm kitchen door hole. Fixed lengths for 600mm, 616mm, 635mm and 650mm wide worktops. Cuts up to 40mm thick worktops with or without anti-drip postformed edge. Two open ended bolt recesses (dog bone style) for 150mm bolts. 10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up. Pins made from ABS plastic for strength. Jig requires: A portable plunge router with 12.7mm (½") shank capacity and minimum 1300 watts. A template guide bush with 30mm outside diameter ref. GB30 A TCT router cutter with 12.7mm (½") diameter and 50mm (2") cut length. Two clamps.
Hotpoint H2IHD526BUK Fully Integrated Full Size Dishwasher - Black Control Panel with Fixed Door Hinge Kit - E Rated, Black
269 GBP
Greasy plates won't be piled in the kitchen sink with this Hotpoint dishwasher. The top basket can be adjusted to fit in bulkier items underneath, so, if you have chopping boards or trays that need some attention, you'll have no problem. But, if you're just looking to clear away a few plates and cups, the Half Load function will get everything sorted in a jiffy. And if you'd like a deeper clean, you'll be glad to have the Sanitising Cycle. It removes 99.9% of bacteria from your cookware, giving it an extra deep clean. So now those knives, forks and plates will be completely free from pesky germs.
Apple AirPods 4 with Active Noise Cancellation, Wireless Earbuds, Bluetooth Headphones, Adaptive Audio, Transparency Mode, Personalised Spatial Audio, USB-C Charging Case, Wireless Charging, H2 Chip
153.98 GBP
Immerse yourself in next-level sound with the Apple AirPods 4 , engineered for a premium listening experience and total wireless freedom. Featuring Apple’s powerful H2 chip , Active Noise Cancellation , and Adaptive Audio , these next-generation AirPods automatically adjust to your surroundings for rich, balanced sound wherever you go. With a sleek design, all-day comfort, and a convenient USB-C wireless charging case , the AirPods 4 deliver superior performance in every detail. Advanced Active Noise Cancellation (ANC) for a truly immersive listening experience – perfect for travel, work, or relaxation. Transparency Mode allows you to stay aware of your surroundings without removing your earbuds. Adaptive Audio intelligently blends ANC and Transparency Mode for dynamic sound control based on your environment. Personalised Spatial Audio with head tracking delivers theatre-like, three-dimensional sound for music and movies. Powered by the H2 chip , offering ultra-low distortion, enhanced sound quality, and improved battery efficiency. USB-C charging case supports both wired and wireless charging, keeping you powered throughout the day. Designed for all-day comfort with a secure, ergonomic fit and sweat and water resistance (IPX4). Bluetooth 5.3 connectivity ensures seamless pairing and instant switching between Apple devices. Up to 6 hours of listening time per charge, and over 30 hours with the case . The Apple AirPods 4 redefine wireless audio with intelligent features, exceptional comfort, and unmatched sound quality. Whether you’re commuting, working out, or relaxing, these earbuds automatically adapt to give you the perfect listening experience. With the H2 chip delivering improved performance, clear calls, and effortless control through Siri and touch gestures, they set a new benchmark for wireless earphones. Specification Details Model Apple AirPods 4 Chip Apple H2 Connectivity Bluetooth 5.3 Audio Features Active Noise Cancellation, Transparency Mode, Adaptive Audio, Personalised Spatial Audio Microphones Dual beamforming microphones Battery Life Up to 6 hours (earbuds), 30+ hours with charging case Charging Case USB-C + Wireless Charging Water Resistance IPX4 (sweat and splash resistant) Controls Touch and voice (Hey Siri) Compatibility iPhone, iPad, Mac, Apple Watch, Apple TV Dimensions (Case) Approx. 46 x 54 x 22 mm Weight (Each Earbud) Approx. 5 g Colour White EAN/Barcode 195949689673
Apple AirPods 4 with Active Noise Cancellation & USB-C Wireless Charging Case, Bluetooth Earbuds with Adaptive Audio & H2 Chip
147 GBP
Brand Apple Colour White Form factor In Ear Noise control Active Noise Cancellation Model name Apple AirPods 4 with Active Noise Cancellation Connectivity technology Wireless Wireless communication technology Bluetooth Special feature Volume Control, Noise Cancellation, Rechargeable Battery, Fast Charging, Microphone Included Included components AirPods 4 with Active Noise Cancellation, Charging Case (USB-C), Documentation Age range (description) Adult About this item REBUILT FOR COMFORT — AirPods 4 have been redesigned for exceptional all-day comfort and greater stability. With a refined contour, shorter stem, and quick-press controls for music or calls. ACTIVE NOISE CANCELLATION — AirPods 4 with Active Noise Cancellation help reduce outside noise before it reaches your ears, so you can immerse yourself in what you’re listening to. HEAR THE WORLD AROUND YOU — The powerful H2 chip comes to AirPods 4. Adaptive Audio seamlessly blends Active Noise Cancellation and Transparency mode — which lets you comfortably hear and interact with the world around you exactly as it sounds — to provide the best listening experience in any environment. And when you’re speaking to someone nearby, Conversation Awareness automatically lowers the volume of what’s playing. IMPROVED SOUND AND CALL QUALITY — Voice Isolation improves the quality of calls in loud conditions. Using advanced computational audio, it reduces background noise while isolating and clarifying the sound of your voice for whoever you’re speaking to. MAGICAL EXPERIENCE — Just say “Siri” or “Hey Siri” to play a song, make a call or check your schedule. And with Siri Interactions, now you can respond to Siri by simply nodding your head yes or shaking your head no. Pair AirPods 4 by simply placing them near your device and tapping Connect on your screen. Easily share a song or show between two sets of AirPods. A skin-detecting sensor knows to play audio only when you’re wearing AirPods and pauses when you take them off. And you can track down your AirPods and Charging Case with the Find My app. PERSONALISED SPATIAL AUDIO — Personalised Spatial Audio with dynamic head tracking places sound all around you, creating a cinema-like listening experience for music, TV shows, movies, games and more. REDESIGNED CASE — The Charging Case is the smallest in the industry with wireless charging. Charge with an Apple Watch charger, USB-C Charge Cable or Qi-certified charger. LONG BATTERY LIFE — With Active Noise Cancellation enabled, get up to 4 hours of listening time on a single charge and up to 20 hours using the case. And you can get up to 30 hours of total listening time without Active Noise Cancellation enabled. DUST, SWEAT AND WATER RESISTANT — AirPods 4 and the Charging Case are rated IP54 dust, sweat and water resistant, so they’ll withstand rain and heavy workouts.
Trend BR04X1/4TC 12mm 1/4"" TCT Straight Hinge Recess 2 Flute Router Cutter x4
58.95 GBP
General description The Trend BR04X1/4TC is a 12mm 1/4" TCT straight hinge recess router cutter designed for precision and efficiency. This two-flute cutter provides excellent chip clearance, making it ideal for shallow lateral routing cuts, particularly for recessing hinges. Technical specifications Diameter: 12mm Shank size: 1/4" Type: TCT (Tungsten Carbide Tipped) Flutes: 2 Usage Perfect for making recess cuts for hinges. Final trimming of corners may be required using a hand chisel or a corner chisel.
Trend BR04X1/4TC 12mm 1/4"" TCT Straight Hinge Recess 2 Flute Router Cutter x2
31.95 GBP
General description The Trend BR04X1/4TC is a 12mm 1/4'' TCT straight hinge recess router cutter designed for precision and efficiency. This two-flute cutter provides excellent chip clearance, making it ideal for shallow lateral routing cuts, such as recessing hinges. Technical specifications Diameter: 12mm Shank size: 1/4'' Type: TCT (Tungsten Carbide Tipped) Flutes: 2 Usage Perfect for creating recesses for hinges in wood and other materials. Final trimming of corners may be required using a hand chisel or a corner chisel for a clean finish.
Trend C250X1/2TC 35mm Router Hinge Bit
67.98 GBP
These specially designed machine bits have a specially designed form of scriber to allow use at high speeds. D 35 mm OL 60 mm Shank Diameter 1/2 inch Recommended speed 1000-20000 rpm
Trend C172 x 1/2 TCT Two Flute Router Cutter 12 x 63mm
36 GBP
C172-x-1-2-TCT-Two-Flute-Router-Cutter-12-x-63mm-Trend-C172X1-2TC-p-Trend-Craft-Pro-Two-Fluted-Tungsten-Carbide-Tipped-Router-Cutters-are-suitable-for-a-wide-range-of-applications-such-as-engraving-grooving-rebating-and-shallow-morticing-p-p-They-can-be-used-on-a-wide-range-of-materials-such-as-softwoods-hardwoods-MDF-plywood-and-chipboard-p-p-All-cutters-are-TCT-and-have-a-bottom-cut-feature-p-p-Shank-1-2in-br-Diameter-1-2in-12mm-br-Cutting-Length-2-1-2in-63mm-b
Trend C056A x 1/2 TCT Radius Cove Cutter 9.5mm Radius
38.09 GBP
C056A-x-1-2-TCT-Radius-Cove-Cutter-9-5mm-Radius-Trend-C056AX1-2TC-p-Trend-C056A-TCT-Radius-Cove-Cutter-with-two-flutes-and-carbide-TCT-tips-for-a-cleaner-cut-and-fast-clearance-of-waste-in-all-timber-and-timber-based-materials-9-5mm-radius-12-7mm-cut-depth-for-classic-decorative-mouldings-and-edge-details-p-p-1-2in-shank-ideal-for-heavy-duty-applications-and-router-table-use-with-a-K-marked-shank-to-ensure-safe-working-practices-PTFE-coating-to-minimise-heat-and-resin-build-up-for
Trend - KWJ950/PRO 950mm Pro Kitchen Worktop Jig Mitre Template With x2 T-Clamps
204.95 GBP
General description The Trend KWJ950/PRO is a 950mm professional multi-material worktop jig designed for routing mitre joints in laminated, timber, and compact laminate surfaces. It features innovative front edge alignment technology, allowing for precise positioning and accommodating various worktop widths. This jig is ideal for both square-edged and modern bullnose worktops, providing a cleaner aesthetic and improving router runtime. Technical specifications Length: 1260 mm Width: 340 mm Thickness: 12 mm Weight: 7.4 kg Insets: 3/10/35 mm Backsets: 600/610/616/620/635/700/900/950 mm Bolt Recesses: 4 Bolt Recess Centres: 175 mm Corner Radius: 40/100 mm Peninsular Radius: 400 mm Requires: Guide Bush 30 mm, Router Cutter 12.7 mm dia., Plunge Router 50 mm length, 1/2 inch F-Clamps min. Compatibility and accessories Compatible with Trend Pro Workshop Jigs KWJ750P and KWJ900P Works with T section track saw guide rails from Makita, Festool, Evolution, Milwaukee, and Triton Fits 18mm MFT top